Standard / Quality Pipes

Home Standard / Quality Pipes

Standard / Quality Pipes

ASTM A53 SCH 40 - 80 / SASO

  • Outer Diameter : 1 ½ inch & smaller : ± 0.4 mm.
    2 inches and larger : ± 1%.
  • Thickness : - Wall Thickness : - 12.5%.
  • Weight : + 10%.

Some Application

  • Water pipe lines
  • Fencing
  • Fire Fighting systems
  • Barriers

EN 10255 (BS 1387- 85)

  • Dimension and Weights are in accordance with ISO 65.
  • Hydrostatic test pressure :700 PSI (50 kg/cm² )
  • Tolerances & Thickness : Light :-8%, Medium :-10%.

Some Application

  • Water pumping
  • Irrigation systems
  • Bridges
  • Car sheets
  • Light poles
  • Dairy farm houses

BS Commercial BS21

  • Tensile Strength: 33 - 47 kgf/mm².
  • Elongation is 5.65 √S° : 20% (min).
  • Hydrostatic Pressure for test : 50 kg/cm² (700 PSI).
  • Standard length : 6 m.
  • Unit weight of tube will vary with respect to OD & wall thickness.

Some Application

  • Steel structural
  • Fencing
  • Hand rails
  • Dairy farm houses
  • Roofing

Electrical Rigid Steel Conduit Tubes UL-6

  • Tolerance : Nominal Size 12 - 41 mm ±0.38 mm, Nominal Size 53 - 155mm ± 1%.
  • The lengths indicated are designed to produce a 3.05m (10 ft) length conduit when straight-tapped conduit coupling is attached.

Scaffolding Tubes